0 items

Secure Checkout
AMPLIFIERSVHF70 CMUHF2 METERSREPEATER6 METERS

Product Search
Site Menu

Sister Companies

Company News
CLICK HERE! to check out our NEW PRODUCTS!

Dayton Hamvention @ Dayton, OH
May 15-17, 2015

** NEW FEATURED PRODUCTS **
MFJ-226
1-230 MHZ ANTENNA EXPECT TIMES GRAPHIC ANALYZER


$ 339.95 each
MFJ VNA Antenna Analyzer covers 1 to 230 MHz, 1Hz resolution.

•Frequency sweep plots: SWR, Impedance, Resistance, Reactance,Phase Angle, Complex Return Loss, Smith Chart

•Sign of reactance

•Amazing accuracy with OSL(Open-Short-Load) calibration.

New MFJ-226 introduces the MFJ Times Technology series of advanced Antenna Analyzers!

This groundbreaking VNA antenna analyzer -- MFJ-226 Antenna Expert -- delivers OSL calibration and true reactance including its sign from 1 MHz to 230 MHz with 1-Hz frequency resolution!

Incredibly Powerful MFJ-226 is the first and only low-cost handheld VNA(Vector Network Analyzer) to feature OSL(open/short/load) calibration for super accuracy and sign of reactance to positively identify inductive or capacitive reactance.

These two features, normally only found on lab instruments, place incredible diagnostic power in the palm of your hand.

With it, you`ll measure impedance plus many other critical load parameters directly or through a feed-line or test cable with exceptional accuracy, correcting for line loss and phase angle.

Single Frequency Mode
Presents an unusually wide range of load information including . . .
SWR
Frequency
Impedance Magnitude
Series and Parallel Impedance (R±jX)
S11 (Rectangular and Polar)
Capacitance
Inductance

Swept-Frequency Mode
Generates, displays, captures accurate plots versus frequency of
SWR
Impedance (Z)
Resistance (R)
Reactance (±X)
Return Loss (S11)
Phase Angle
Smith Chart
SmithChart plot shows S11 magnitude and phase angle over any frequency span you specify.

32 Memories
32 memories let you capture screens made in the field for download into your PC via mini USB port for later storage and use.

Store OSL Calibrations
You can run OSL calibrations through your test cable or feed-line or at different frequencies and store them for future use.

Fits Your Hand Perfectly
Better doesn`t mean bigger! The MFJ-226`s compact and virtually indestructible molded case fits your hand perfectly with real back-lit keys that depress to give you tactile feedback.

Easy-to-read Backlit LCD
Bright 2 1/2 inch LCD backlit screen is easy-to-read, even in direct sunlight.

Use two AA batteries
Use disposable Alkaline or rechargeable NiMH AA batteries (not included).
Firmware upgradeable via USB port.
Includes N-to-SO-239 adapter and 48-inch mini USB to USB cable.

3 1/4W x 6 1/2H x 1D inches.
9.3 ounces.

Looks, Feels, Performs Like a Professional Instrument

MFJ-226 has both the hefty feel and advanced performance of a professional field-service instrument costing hundreds or even thousands of dollars more.

If you`ve ever wished for the accuracy and flexibility of a professional-grade S11 VNA without the boat-anchor packaging and prohibitive price, your search ends here. The MFJ-226 pulls together the latest advances in RF technology and delivers them to you at a price you can`t afford to pass up!


MFJ-939I
PLUG,PLAY,200W AUTOTUNER, HF,W/CABLE,ICOM


$ 159.95 each
Plug & Play Auto Tuner

Plug & Play! You won’t even know it’s there . . . MFJ-939I/K/Y automatically tunes your antenna as you tune your radio. SWR is just always low.

Tunes your coax fed or random wire antennas 1.8-30 MHz from 2 Watts QRP to full 200 Watts SSB/CW.

Matches 6-1600 Ohms (SWR up to 32:1) -- that’s a 50% wider matching range than competing products that are less capable and higher priced . . . and it’s made in the USA.

Highly intelligent, ultra-fast tuning!
As you’re ragchewing, contesting or DXing, the MFJ-939 is learning your antenna and the way you operate and storing all this in its 20,000 memories. The more you use it, the more it learns.

Measure & Compute = Instant Match
MFJ-939 uniquely measures your antenna’s complex impedance (R, X), computes the L-network and snaps in needed components for instant matching.

AdaptiveSearch
AdaptiveSearch determines a sub-set of all solutions that can provide a safe match and searches only that subset giving
you an ultra fast match. Others search slowly through all solutions.

InstantRecall
InstantRecall first checks its memory to see if you have operated this frequency before. If so, tuning is instantaneous and you’re ready to go!

MFJ VirtualAntenna Memory
MFJ exclusive VirtualAntenna Memory system gives you 8 antenna memory banks of 2500 memories each.
You can use an antenna switch to select up to 8 antennas and assign each antenna its own 2500 memories!

4 Times More Solutions and Faster!
MFJ has 256 values each of capacitance and inductance for 131,072 matching solutions giving you a finely tuned very low SWR. That`s 4 times the 32,768 solutions of competitors using only 128 L/C values each!
Don`t be fooled by competing products claiming fast search times -- if you have a quarter of the matching solutions, of course,it takes less time to finish but it`s not faster.
MFJ`s faster speed comes from advanced technology and software algorithms not from fewer solutions.

Audio SWR Meter
An Audio SWR meter beeps when SWR <1.5, 2, 2.5, 3. Alarms if >3. Audible & Visible Diagnostic messages.

Heavy-Duty Components
Heavy-duty L-network: 10 Amp/1000V relays, RF duty silver mica caps won’t burn up. Safe, reliable, continuous 200W SSB/CW.

As Small as Your Radio
Tiny 6 1/2W x 2 7/8H x 8 3/8D”. 2.4 lbs. SO-39s, random wire ant. & gnd posts.

Never Obsolete . . . Super Versatile
Truly Plug & Play! No settings, only one cable to plug in! Order MFJ-939I, Icom; MFJ-939K, Ken; MFJ-939Y, Yaesu. Specify Yaesu: FT-100/450/950/ 857/897/1000MP/9000/2000 or other.

Never Obsolete!

If you get a new transceiver, simply order a new Plug and Play cable.

Super Versatile! Works with ALL older rigs, classic transmitters, Flex, Elecraft, Tentec, QRP, others. Auto tune antenna -- touch tune button on any MFJ-939I/K/Y for any rig.

2-Year NoMatterWhatWarranty





B-320-G


$ each
To see all Mirage Amps, please see Mirage Amps

Add this amp to your 2 Meter HTor mobile radio and get 200 Watts brutal output. Talk further, longer, clearer!

Has 15 dB GaAsFET preamp, works all modes FM/SSB/ CW. Fully protected by high SWR protection. Includes mobile mounting bracket. An input level switch selects proper input power from your HTor mobile radio. Low power input for hand-held radios, 250 mW to 10 Watts. 1/4 Watts in gives 132 Watts output. 3 Watts input from your HTgives full power output.

High power input for mobile radios, 10 Watts to 50 Watts. 10 Watts input gives 95 Watts output. 50 Watts input gives full power output.

Custom wrap-around heatsink gives excellent heat dissipation.

Superb Mirage Warranty

Input Power Range: .25-50.
I (MAX) at 13.8 Volts: 25.
Weight in Pounds: 5.
Size WxHxD in inches: 7.75x2.75x9.75.
PreAmp Gain: 15 dB.

Typical Power Out for Watts in (HT):
.25: 132.
0.5: 165.
1: 175.
2: 190.
3: 200.

Typical Power Out for Watts in (Mobile):
.25: 1.5.
0.5: 4.
1: 10.
2: 24.
3: 32.
5: 48.
6: 64.
8: 82.
10: 95.
15: 135.
20: 148.
25: 165.
35: 186.
50: 200.

MIRAGE B-320-G - 2-Meters with HT or Transceiver - Typical Power Curve
Watts In0.250.531025354050
B-320-G Watts Out (Mobile Amp)1.543295165186193200
B-320-G Watts Out (HT Amp)132165200-----


B-5018-G
VHF AMP,50W IN-160W OUT,144-148 MHZ


$ 399.95 each
To see all Mirage Amps, please see Mirage Amps

The B-5018-G is similar to the B-2518-G.

For 20 to 60 Watt mobile or base stations. 160 Watts out for 50 Watts in.

MIRAGE 160 Watts on 2 Meters – Power Curve - typical output power in Watts
Watts In0.250.53581015253550
B-1018-G Watts out2550140150160160    
B-2518-G Watts out57406080100125160160160
B-5018-G Watts out 21525405070100130160



KP-2/440
PRE-AMP,70-CM MAST-MOUNT, 430-450MHZ


$ 199.95 each
To see all Mirage Amps, please see Mirage Amps

High gain ultra low noise GaAsFET preamps for receiving weak signals. Select-able gain prevents receiver intermod. 15-22 dB gain. Auto RF switching to 160W. Choose In-shack or Mast-Mount models).

ModelFrequency
Model KP-1 In-Shack Models
KP-1/10M28-30 Mhz
KP-1/6M50-54 MHz
KP-1/2M144-148 Mhz
KP-1/220220-225 MHz
KP-1/440430-450 MHz
Model KP-2 Mast Mount Models
KP-2/10M28-30 Mhz
KP-2/6M50-54 MHz
KP-2/2M144-148 Mhz
KP-2/220220-225 MHz
KP-2/440430-450 MHz


In-Shack Model Features:
• Automatic RF Switching
• GaAsFET boosts weak receive signals
• In-Line design for easy operation
• High or Low switchable gain setting
• Gain: from 15 dB to greater than 25 dB
• Noise: less than 1 dB
• Power Handling: 100 Watts
• Size: 4 1/4" W x 2 5/16" H x 1 3/16" D

Mast Mount Model Features:
• Automatic RF Switching
• GaAsFET boosts weak receive signals
• Mast Mounted design to reduce loss
• In-Line design for easy operation
• High or Low switchable gain setting
• Gain: from 15 dB to greater than 25 dB
• Noise: less than 1 dB
• Power Handling: 100 Watts
• Voltage: 12-15 VDC
• Size: 4 1/4" W x 2 5/16" H x 1 3/16" D


BD-35
DUAL BAND 144/440 HT AMP, 35/45W OUT


$ 199.95 each
To see all Mirage Amps, please see Mirage Amps

Mirage Dual Band BD-35

• 45 Watts Output on 2 Meters • 35 Watts output on 440 MHz
• New! D*STAR COMPATIBLE!
• Reverse Polarity Protection
• Free Mobile Bracket Included
• Works with all majorbrand Handhelds up to 8 Watts
• Auto RFsense T/R switch

Add this MIRAGE BD-35 dual band amp and boost your handheld to a much more powerful mobile or base - 45 Watts on 2 Meters or 35 Watts on 440 MHz! Get 35 Watts out with just 4 Watts in! BD-35 is now D-STAR compatible!

MIRAGE’s exclusive FullDuplex Amp™ lets you talk on a band and listen on another band at the same time -- just like a phone conversation (requires compatible HT).

Features auto band selection, reverse polarity protection, on-air leds, single connector for dual band radios/antennas, free mobile bracket and more!

Works with HTs to 7 Watts. Compact 5" W x 1 ½" H x 5" D. Draws 7 Amps at 13.8 VDC.

MIRAGE Dual Band 2-Meter / 440 MHz Amplifier for HTs - Typical Power Curve
Watts In0.250.512345678
DB-35 Watts Out (2 Meters)1018304045454545+45+45+
DB-35 Watts Out (440 MHz)410162632353535+35+35+


B-310-G


$ each
To see all Mirage Amps, please see Mirage Amps

For an incredibly low price, you can boost your 2 Meter handheld to a powerful 100 Watts mobile/base!

Turn "you`re breaking up... Cant copy..." into "Solid Copy ... Go Ahead."

Talk further... Reach distant repeaters .... log onto faraway Packet bulletin boards.

This rugged Mirage B-310-G amplifier operates all modes: FM, SSB and CW. Its perfect for all handhelds up to 8 watts and multi-mode SSB/CW/FM 2 Meter rigs.

Low Noise GaAsFET preamp

A built-in low noise GaAsFET receive preamp gives you 15 dB gain -- lets you dig out weak signals.

Fully Protected

SWR Protection prevents damage from antennas whipping in the wind. Reverse Polarity Protection can save your amp if you connect power backwards.

Compact but Powerful

Mirages integrated HeatsinkCabinet and whisper quiet fan gets heat out fast!

The results? An ultra-compact 4.75" x 1.75" x 7.75" 2 %frac12; pound amplifier that delivers a super power 100 Watts. It will get you through the most congested bands and snag a rare contact!

Free Accessories

Free 3 foot handheld to B-310-G coax cable - just plug and play! Free mobile bracket! Free rubber mounting feet!

Plus More...

Automatic RF sense Transmit/Receive switch. Remote keying jack. LEDs monitor "On Air", high SWR, pre-amp, power. Push buttons select SSB/FM, pre-amp, power. Draws 15 Amps at 12-15 VDC.

Full one year Mirage warranty

With Mirages legendary ruggedness, you may never need our superb warranty.

MIRAGE 2 – Meter Amplifiers - Typical Power Curve
Watts In0.250.512345678
B-34-G Watts Out8121830333535353535
B-310-G Watts Out25507595100100100100+100+100+
DB-35 Watts Out (2 Meters)1018304045454545+45+45+
DB-35 Watts Out (440 MHz)410162632353535+35+35+


B-2518-G
VHF AMP,25W IN-160W OUT,144-148 MHZ


$ 399.95 each
To see all Mirage Amps, please see Mirage Amps

MIRAGE’s most popular amplifier gives you 160 Watts of output power for just 25 W in from your base/mobile rig!

The B-2518-G is ideal for your 20 to 60 Watt 2 Meter mobile or base station.

You will talk further, longer, clearer on all modes - FM, SSB, CW- hear weak signals better than you’ve ever heard before!

You get a low noise 20 dB GaAsFET preamp with an excellent 1 dB noise figure for pulling out weak signals.

B-2518-G is fully protected with features found in expensive commercial amplifiers.

High SWR or excessive input power can damage your amplifier. Protection circuits automatically bypass your amplifier to prevent damage and an LED lights to warn you.

An Active-Bias™ system keeps SSB voice crisp and clear for fantastic operation. Other amplifiers using conventional bias methods tend to produce splatter and distortion as power level changes. This amp with Active-Bias™ doesn’t exhibit the problem.

Adjustable time delay gives you smooth transmit/receive switching. Remote external keying. Extra heavy duty custom heatsink spans the entire cabinet. Draws 17 - 22 A from 13.8 VDC. Compact 12" x 3" x 5.5".


Amp Remote Control

Remotely control your B-2518-G / B-5018-G / B-1018-G and place it out of the way. An RC-2, Remote Control lets you turn power on/off, preamp on/off, select SSB/ FM. Other Mirage amps use RC-1. Call Mirage for positive compatibility.

MIRAGE 160 Watts on 2 Meters – Power Curve - typical output power in Watts
Watts In0.250.53581015253550
B-1018-G Watts out2550140150160160    
B-2518-G Watts out57406080100125160160160
B-5018-G Watts out 21525405070100130160





B-2518-R
VHF R.AMP,10-12W IN-120W OUT,145-148 MHZ


$ 629.95 each
To see all Mirage Amps, please see Mirage Amps

11 models to choose from - continuous duty all mode FM/SSB/CW repeater amplifiers for 6, 2, 220 MHz, 450 MHz, and ATV service.

50, 144 and 220 MHz Models

FEATURES:

Cool Running - A10” high by 19” wide full finned rack-mounted heatsink keeps the transistor temperatures low for long life. Chassis cover is perforated so air convection will keep the circuit board area cool.

Dual Protection - The amplifiers have two temperature sensors; one on the heatsink and one on the circuit board. If conditions cause either to overheat, the amplifier will shut off until it cools down to a safe temperature.

Bypass Mode - These models will feed the exciter output straight through to the antenna in an over-temperature condition.

The bypass mode can also be remotely selected by proper interfacing to the repeater controller. Either a relay contact or a TTLlogic can be used to select the bypass mode or amplified mode of operation.

Reduced Relay Wear - The amps have a selectable long release time (adjustable up to 5 seconds) for the RF change-over relay. This prevents unnecessary action during repeater operation.

On-site Control - The bypass mode and relay release time can be selected with built-in switches. The operational MIRAGE RC-1 remote control box can be used to switch these functions up to 18 feet away from the amplifier.

Warranty - Mirage repeater amplifiers are guaranteed for one year against failure due to defective workmanship or materials.

MIRAGE Repeater Amplifier Specifications
ModelInput PowerMax Output PowerMHz
A-1015-R.25 – 5 W98 W50 – 52 MHz
B-1018-R.25 – 3 W130 W145 – 148 MHz
B-2518-R.5 – 10 W111 W145 – 148 MHz
C-211-R.25 – .5 W80 W223 – 225 MHz
C-1012-R.25 – 6 W96 W223 – 225 MHz
C-2512-R.05 – 15 W90 W223 – 225 MHz
D-1010-NR.25 – 4 W80 W440 – 450 MHz
D-3010-NR1 – 15 W75 W440 – 450 MHz
D-100-ATVN-R.25 – 1 W52 W440 – 450 MHz
D-1010-ATVN-R.25 – 4 W80 W420 – 450 MHz


B-34-G
2-M AMP, 2W-IN/35W OUT, GFET, FM/SSB/CW


$ 129.95 each
To see all Mirage Amps, please see Mirage Amps

Add this MIRAGE amp to your 2 Meter handheld and get 35 Watts output; talk further, longer, clearer .

First-class strip-line techniques and modular construction gives superb RF performance and unsurpassed reliablity . . .

Custom wrap around heatsink provides excellent heat distribution - runs cool for extra long life. Reverse polarity protection can save your amp and your pride if you connect power backward . . .

Automatic RF sense transmit / receive switch makes operation easy. Low input SWR keeps your handheld safe from over heating. Individual pushbutton switches lets you select FM/SSB operation, receive preamp on/off and power on/off.

LEDs show On-Air, receive preamp on and power on. 5 ¼" x 1 ¾" x 4 ¾”. Free mobile mount bracket, hardware.


B-34. Like B-34-G but FM only, less preamp, mobile bracket. Tiny 3 ⅛" x 1 ¾" x 4 ¼".

MIRAGE 2 – Meter Amplifiers - Typical Power Curve
Watts In0.250.512345678
B-34-G Watts Out8121830333535353535
B-310-G Watts Out25507595100100100100+100+100+
DB-35 Watts Out (2 Meters)1018304045454545+45+45+
DB-35 Watts Out (440 MHz)410162632353535+35+35+


DOWNLOAD
Your New MFJ 2015
Ham Radio Catalog

HERE!

140 Pages of MFJ, Ameritron, Hygain, Cushcraft, Mirage and Vectronics Products!

REQUEST PRINT CATALOG!


B-1018-G
VHF AMP,10W IN-160W OUT,144-148 MHZ


$ 449.95 each
To see all Mirage Amps, please see Mirage Amps

Input Power Range: .25 - 15.
I (MAX) at 13.8 Volts: 25.
Weight Pounds: 5.
Size WxHxD inches: 12x3x5.5.
PreAmp Gain: 20 dB.
Typical Power Out for Watts in:
.25: 15.
0.5: 30.
1: 60.
2: 100.
3: 130.
5: 150.
6: 153.
8: 155.
10: 160.
15: 160+.

MIRAGE 160 Watts on 2 Meters – Power Curve - typical output power in Watts
Watts In0.250.53581015253550
B-1018-G Watts out2550140150160160    
B-2518-G Watts out57406080100125160160160
B-5018-G Watts out 21525405070100130160


B-34
2-M VHF AMP, 2W-IN/35W-OUT, FM


$ 109.95 each
To see all Mirage Amps, please see Mirage Amps

35 Watts out for 2 watts in. Similar to B-34-G but FM only, less preamp, and mobile bracket.

It`s also a tiny 3 ⅛" x 1 ¾" x 4 ¼".

MIRAGE 2 – Meter Amplifiers - Typical Power Curve
Watts In0.250.512345678
B-34-G Watts Out8121830333535353535
B-310-G Watts Out25507595100100100100+100+100+
DB-35 Watts Out (2 Meters)1018304045454545+45+45+
DB-35 Watts Out (440 MHz)410162632353535+35+35+






B-34
2-M VHF AMP, 2W-IN/35W-OUT, FM
$109.95 each



KP-2/440
PRE-AMP,70-CM MAST-MOUNT, 430-450MHZ
$199.95 each



B-2518-R
VHF R.AMP,10-12W IN-120W OUT,145-148 MHZ
$629.95 each



B-34-G
2-M AMP, 2W-IN/35W OUT, GFET, FM/SSB/CW
$129.95 each




All information, images, and documents on this website are the sole property of Mirage Any reuse or redistribution of the contents of this website are strictly forbidden without authorization from Mirage
Enter your callsign to see if you have an eQSL waiting!